Right Position Miter Gearbox Standard Features
Dimensions: right position miter gear drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft can be utilized as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened metal ball bearings, long term lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: Three shaft connections are provided for versatility in application
RAB-1 may be operated CW, CCW or BACK driven
RAB-1 is rated at 1/3 HP in 1800 RPM. Maximum quickness is 3000 RPM
Benefits and COST BENEFITS
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless shaft (Make sure you specify series stainless needed)
Longer shafts lengths on input and output
Right Angle Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with tranquil, reliable spiral bevel gears. These high quality bevel gearmotors feature hardened spiral bevel gears and non-magnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting options. The fully enclosed design guarantees the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Way Gearboxes are made for maximum strength and heat dissipation. The drives are available with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any use that demands the dependable transfer of speed or power, you could find a two-way gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them perfect for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power out there. Our company is well known for its innovative styles and producing high-quality motion control solutions created for engineered functionality and durability. We provide a range of gearbox styles and a wide selection of flexible shaft couplings to supply you with a finish solutions for your mechanical and power transmission applications.
Right Angle Gearbox
Correct angle gearboxes are seen as a the actual fact that the drive shaft and the result shaft are arranged at an angle of 90 degrees. According to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results within an axis offset.
Right angle gearboxes are noticed with different types of gear teeth or a combination of different gearing types. The most popular single-stage gearbox types are bevel and worm.
Due to the high single stage ratios and the low effectiveness level, worm gears can perform a self-locking impact. With worm gears it is also possible to get a hollow shaft as the drive shaft.
Bevel gearboxes come with different types of gearing. Bevel gearboxes with intersecting axes are noticed using bevel gearing with straight, helical or spiral tooth. Hypoid gearboxes possess helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically sensible ratios with that your bevel gear stage could be realized is bigger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes can also be combined with other gearbox types. A regular app in this respect may be the mixture with a planetary gearbox, whereby the planetary gearbox could be linked upstream or downstream. This outcomes in an array of overall multiplication elements and wide range of uses in lots of industrial applications.
The efficiency level of bevel gearboxes is normally lower than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. That is because the bevel equipment stage generates a higher degree of axial drive and radial force, which has to be absorbed by suitable bearings. This escalates the power reduction, which is particularly notable in the drive stage of the gearbox.
The operating noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur equipment teeth. Hypoid gearboxes, however, are incredibly noisy and will transmit large amounts of torque, but a considerable amount of bearing load occurs in the bevel equipment stage of the gearboxes.
In summarizing, the right angle gearbox is often used when the quantity of installation space in the application is limited, or an angular arrangement between your drive and the output is necessary by the application. They are also used in instances where in fact the input shaft must be hollow to be able to lead through lines or make use of clamping sets.
The advantages of right angle gearboxes:
Use when installation space is limited
Can be combined with other styles of gearbox
Quiet and high degree of torque when working with hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower effectiveness level than planetary gearbox
Decrease torques in single-stage ratio range
The Ever-Power, the initial right angle gearbox drive, is more popular and is used worldwide. The Ever-Power provides manual or power tranny of rotary motion in a concise, standardized right angle unit.
Our standard line of bevel gearboxes can be found from stock in both an ” and Metric Series, single or dual result shafts, 1:one or two 2:1 ratios, and grease lubricated forever and also have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize completely enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, on our CNC machining center and then coated with a chemical film to safeguard the materials, and use flanged ends and side bosses for compact installation in a wide range of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless steel. On the two 2:1 models, the pinion shaft is certainly carbon steel. For the sizes 4 & 5, the materials is black oxide carbon steel. Shafts can be given unique extensions (with flats, splines, holes, etc.) and /or specific lengths upon demand.
In addition to your standard versions, we will modify our units to meet up your design specifications! Our product sales and engineering departments will be ready to help you together with your specific application requirements.
Over the years we’ve received questions about almost every aspect of the gearbox selection procedure. One of the queries we’ve had several times is, “Exactly what is a right-angle gearbox or a right-position drive?” Or, more specifically, “How is a right-angle gearbox or drive not the same as a velocity reducer or other styles of gearboxes?”
First, let’s focus on some basic terminology. It is not uncommon for the conditions “gearbox”, “drive” and “quickness reducer” to be utilized interchangeably.
A gearbox is any device that runs on the gear train to transmit torque/rpm and whatever uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a system with a gear teach that may transmit torque/rpm 90 degrees, to carefully turn a corner
A gear reducer is a system with a gear teach that may reduce rpm output. A result of decreasing rpm is increasing torque at the same ratio acceleration is reduced.
A gear box can also be a speed increaser
The type of gear used in the apparatus box defines it as a right angle or an inline drive.
A worm equipment drive is a right-angle drive since is a bevel gear
A spur gear drive is inline
A helical gear is inline but may also be a right-angle drive
So, exactly what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It’s rather a 1 to 1 1 ratio or a multiple of just one 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it is a right-position drive. If the ratio can be greater than 1:1 it is a right-angle speed reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hand rotation to convert power either direction
Easily slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for powerful
Built-in 5 sizes with 3 types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft could be installed opposite to the input shaft.
Three input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to ensure rigidity and machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved warmth dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes includes two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of high quality bearings on all the axis ensures long life to the gearbox and allows high radial and axial loads.
Gearbox housing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right angle gearbox
Right Position Miter Gearbox Standard Features