How to effectively use the role of oil when using the reducer.A car needs gasoline to run, and the same is true for a reducer, which requires oil to run.Every time the reducer is used, the oil will play a big role.Different reducers use different oils, and the oils used under different temperatures are also different.So how do we use engine oil to run our reducer?The following will describe in detail the techniques and methods of using oil for the reducer.
XNUMX. When refueling, you can turn on the vent cap on the upper part of the seat to refuel.When draining the oil, turn the drain plug at the bottom of the main seat to drain the dirty oil.There is no lubricating oil inside the reducer when it leaves the factory.
2. The newly issued reducer has been lubricated and replaced every six months.The grease adopts aluminum disulfide-2# or 2L-XNUMX# lithium-based lubricating grease.
XNUMX. The horizontal cycloid reducer adopts oil pool lubrication under normal conditions, and the oil level can be kept in the middle of the oil window. When the working conditions are bad and the ambient temperature is high, the circulating lubrication can be used.
100. The first 8 hours of refueling operation should be replaced with new oil, and the internal dirty oil should be flushed out before continuous work. The XNUMX-hour work system should be replaced every six months. If the working conditions are bad, the oil change time can be appropriately shortened. Practice has proved the reducer Frequent cleaning and oil change play an important role in prolonging the service life of the reducer.Lubricating oil should be replenished frequently during use.
XNUMX. Vertical installation of planetary cycloidal pinwheel reducer should strictly prevent the oil pump from breaking oil to avoid damage to the parts of the reducer.
40. Cycloid pin gear reducer generally choose 50# or 70# mechanical oil lubrication at room temperature. In order to improve the performance of the reducer and prolong the service life of the cycloid pin gear reducer, it is recommended to use 90# or XNUMX# extreme pressure gears. Oil, lubricating oil should be reconsidered when working under high and low temperature conditions.
Based on the analysis, it can be concluded that the engine oil plays a very important role in the operation of the entire reducer.Under normal conditions of temperature, the use of engine oil can fully provide the performance of the reducer.When working for a long time and using the reducer, it can effectively protect the reducer and prolong the service life of the reducer.
|
