servo gear reducer

Wide range of servo gearboxes, designed to fit almost all servo motors on the market
Designed for the highest torsional stiffness and the cheapest angular backlash, designed for the maximum torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical devices) Catalog SR
Operating instructions:
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the expansion of our selection of Servo Reducers, at this point offering five degrees of precision to meet any application requirements. The five levels of precision offered allows a machine developer to select the required reducer precision to meet their needs and their spending budget. They can be purchased in both in-collection and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of motor couplings and mounting flanges are available for the entire reducer range to mount virtually any servo motor and the hollow bore output can be used to attach output shafts, pinion shafts, or other drive components.
These reducers are typically selected predicated on the peak cycle forces, which usually happen during accelerations and decelerations. These cycle forces rely on the driven load, the rate vs. period profile for the cycle, and any other external forces functioning on the axis. For more selection details, please follow this PDF link.
For application & selection assistance, please call, fax or email us. The application info will be reviewed by our engineers, who’ll recommend the best solution for your application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor input flange and result pinion for rack and pinion drives, and also solid result shafts, Hollow bore output, and insight shafts for all the positioning applications. The modular design allows for universal installation of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange via an adaptor kit. As the gears are naturally angled, they lead to a short total length of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a straightforward and robust design, the series offers gearing ratios that range from 6:1 to 75:1. The user can also customize the materials through the order, in order to match the apparatus to its intended app.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with double shaft, right angle shaft and right angle output, in addition to a full selection of adapters for electric motor mounting, making them with the capacity of meeting the requirements of actually the most varied applications. They are designed for make use of with included servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used in combination with other EP motor types. This selection of products is founded on years of encounter and represents the end result of a decade-long study targeted at improving performance.
Maximum precision and dynamics, combined with remarkable torque density, are the key requirements specific for reliable servo gearboxes in practice. EP provides servo gearboxes for any program and any functionality range. Our low-backlash planetary and right-position gearboxes reflect our passion for creativity and the highest levels of precision.
Worm equipment reducers provide market advance solution with efficiency and flexibility. Low number of basic models can be applied to an array of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical products. When the motor swiftness must be reduced, the output torque raises and send torque totally to the application. We believe that customers will appreciate our equipment reducer to accomplish their demand. Just visit EP, you can obtain more information regarding servo gearheads, servo gearboxes, and equipment reducers. We continue to keep in the years ahead for your support.
Plug the Swiftness Reducer in to the desired channel of your receiver, and plug the business lead from your own servo (or servo wye) into the man servo lead from the circuit plank. The set screw on the blue trim pot, located close to the top of the main circuit board, is utilized to control the speed of the servo. Convert the set screw fully clockwise (CW) for normal servo speed without speed reduction, fully counter-clockwise (CCW) for maximum speed reduction, or any place in between for partial quickness reduction. The reddish colored LED indicates three feasible conditions: Sluggish Blinking = No Signal; Solid On = No Acceleration Reduction; Fast Blinking = Reduced Acceleration Setting
Please note that if you make any modify to the speed establishing while the receiver is on, you need to cycle capacity to the receiver (convert if off and back on) for the new speed environment to take effect. This circuit can also be utilized in conjunction with our Servo Reverser to trigger flap or retract servos to turn in opposite directions for right function. Guidelines are included for easy set up and use.
IMPORTANT NOTE: This device will only focus on a regular, proportional servo. You won’t work on a retract-type servo, as they do not acknowledge any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, even by a transmitter that includes this function, as their design and electronics do not allow it. Check the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a more scale-like motion of flaps or retracts. Adjustable, it can be set to reduce the velocity of your servo from super-slow motion to no speed decrease at all, with an almost infinite amount of positions in between. Maximum reduction time for a servo to travel 90 degrees is approximately 14 seconds, minimum time (no reduction) is simply the normal rate of the servo. Ideal for reducing or eliminating the tendency of a plane to “balloon up” when flaps are deployed. It can be used to control several servo by use of a normal servo Y.
This is actually the new regulated version that can be used on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/LiFE batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as packaging machines, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, right position solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to easily mount to any manufacturer’s servo engine. The EP Series helical gears have got slanted teeth in comparison to spur gears with straight cut teeth, producing a smoother gear mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible versatility and cost-efficiency because don’t assume all application requires high-performance parts.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, soft output shaft
PSKC = B5 output, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 output, with keyway

If you need much more facts regarding servo gear reducer click as well as get accessibility to even more articles!