How to install shaft mountedGeared motor.Here we mainly explain the three aspects of the installation relationship between the shaft-mounted geared motor and the working machine, the connection between the shaft-mounted geared motor and the working machine, and the installation of the counter-torque bracket.The following is a Shanghai reducer to describe in detail how to install it.
XNUMX. The installation relationship between the shaft-mounted geared motor and the working machine
In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine should be as small as possible without affecting the normal working conditions, and its value is 5-10mm.
XNUMX. Connection of shaft-mounted geared motor and working machine
The reducer is directly sleeved on the main shaft of the working machine. When the reducer is running, the reaction torque acting on the reducer case body is balanced by the reaction torque bracket installed on the reducer case body or other methods.The machine is directly matched, and the other end is connected with the fixed bracket.
XNUMX. Installation of the anti-moment bracket
The counter-moment support should be installed inReducerThe side facing the working machine to reduce the bending moment attached to the working machine shaft.The counter-torque bracket and the shaft sleeve of the fixed supporting connection end use rubber and other elastic bodies to prevent deflection and absorb the generated torque fluctuations.
Through the above description of installing the shaft-mounted geared motor, you should have an understanding of the shaft-mounted geared motor. If you need it or want to know more, please contact our customer service staff.