Materials Managing Power UNIT 2
Basic Description
This electrical power unit characteristics power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve using the lowering velocity controlled by the pressure compensated flow management valve. Merchandise of this series is usually extensively utilized in the marketplace of logistic products such as fork lift, mini lift table, etc.
Distinctive Notes
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned prior to mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which must also be clean and no cost of impurities, N46 hydraulic oil is recommended .
four. Oil shifting is required soon after the first 100 operation hrs,afterwards once every single 3000 hrs.
5. The electrical power unit should be mounted horizontally.

Materials Handling Power UNIT one
General Description
This energy unit is created for your fork lift sector, consisting of really efficient gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down movement are managed from the lever on the manual release valve, which can be outfitted with an electrical switch to activate the motor. The lowing pace is controlled from the stress compensated flow manage valve.
Distinctive Notes
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic components concerned prior to installation of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
4. Oil shifting is required following the first one hundred operation hours, afterwards when just about every 3000 hrs.
5. The energy unit proven is created to be mounted horizontally.