ep

January 18, 2021

DUMP TRAILER Power UNIT-DOUBLE ACTING
Standard Description
This electrical power unit features a power up electrical power down circuit with load holding on the two A & B ports. A stress compensatred movement control may be extra to circuit to regulate the decent velocity with the cylinder.
Exclusive Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned prior to set up of the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is suggested.
four. The energy unit must be mounted horizontally.
5. Check the oil degree from the tank just after the original operating with the power unit.
6. Oil transforming is required following the original 100 operation hrs, afterwards as soon as each and every 3000 hours.

DUMP TRAILER Energy UNIT- SINGLE ACTING
Standard Description
This electrical power unit has a electrical power up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve can be provided if needed. Also a stress compen sated movement control can be added on the circuit to regulate the descent speed from the cylinder.
Remark: Please talk to our income engineer for your distinct pump displacement, motor power or tank capability.
Exclusive Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned before set up of the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which should really also be clean and absolutely free of impurities.N46 hydraulic oil is suggested.
four. The power unit ought to be mounted horizontally.
five. Check the oil degree in the tank just after the first running from the electrical power unit.
six. Oil shifting is needed after the preliminary one hundred operation hours, afterwards when every 3000 hrs.