Any injury on the teeth surfaces of the sprocket diminishes the daily life of the conveyor chain.
With typical sprockets, significantly worn sprocket teeth have been repaired by teeth padding or the whole sprocket was replaced. In both case, repair was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for the dramatic financial savings in value and time.
Framework
The teeth can be replaced by two procedures: individual tooth substitute or sectional teeth replacement.
The bolts and nuts utilized for mounting the teeth on to the sprocket are spot-welded to stop loosening.
The respective structures are illustrated to the ideal.
The above photo and also the top rated suitable illustration show a sprocket for individual tooth substitute. Since the joint face amongst the replaced teeth as well as the sprocket is formed in the one of a kind arc, the bonding accuracy is substantial as well as sprocket power is enhanced. Additionally, because the load acting over the mounting bolts is decreased, there’s significantly less likelihood of loosening. This sprocket construction is patented.
There are actually two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for big sprockets acquiring heavy loads and welded sheet steel hubs for other applications.