Solution Description
NEMA 23 BLDC Motor
Common Specification:
/Basic Specification | |
(Product) | (Specification) |
Winding type | Star |
Corridor impact angle | 120 one hundred twenty diploma electrical angle |
Shaft operate out | .571mm |
Radial perform | .02mm@450g |
Finish enjoy | .08mm@450g |
Max.radial pressure | 75N @20mm type the flange |
Max.axial pressure | 15N |
Insulation course | Course B |
Dielectric power | 500VDC for 1 moment |
Insulation resistance | 100MΩ Min.,500VDC |
Electrical Specification:
/Electrical Specification: | ||||||
/Product | ||||||
Specification | Unit | JK57BLS005 | JK57BLS01 | JK57BLS02 | JK57BLS03 | JK57BLS04 |
Variety Of Period | Stage | 3 | ||||
Amount Of Poles | Poles | 4 | ||||
Rated Voltage | VDC | 36 | ||||
Rated Pace | Rpm | 4000 | ||||
Rated Torque | N.m | .055 | .11 | .22 | .33 | .forty four |
Rated Present | Amps | 1.two | 2 | 3.6 | 5.three | six.eight |
Rated Electricity | W | 23 | 46 | 92 | 138 | 184 |
Peak Torque | N.m | .sixteen | .33 | .sixty six | one | 1.32 |
Peak Present | Amps | 3.5 | 6.8 | 11.five | 15.5 | twenty.5 |
Again E.M.F | V/Krpm | 7.8 | 7.7 | seven.four | 7.3 | 7.1 |
Torque Constant | N.m/A | .074 | .073 | .07 | .07 | .068 |
Rotor Inertia | g.c | 30 | 75 | 119 | 173 | 230 |
Physique Size | mm | 37 | forty seven | sixty seven | 87 | 107 |
Fat | Kg | .33 | .forty four | .seventy five | 1 | one.25 |
Sensor | /Honeywell | |||||
Insulation Class | B | |||||
Degree of Security | IP30 | |||||
Storage Temperature | -twenty five~+70ºC | |||||
Functioning Temperature | -15~+50ºC | |||||
Working Humidity | 85% RH() | |||||
Operating Surroundings | (),,,, | |||||
Altitude | 1000 |
Drawing:
one. who are we?
We are based in ZheJiang , China, start from 2011,promote to Domestic Marketplace(26.00%),Western Europe(20.00%),North
The us(20.00%),Northern Europe(10.00%),Jap Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South The us(2.00%). There are complete about 51-one hundred folks in our office.
2. how can we promise high quality?
We are primarily based in ZheJiang , China, commence from 2011,promote to Domestic Market place(26.00%),Western Europe(20.00%),North
America(20.00%),Northern Europe(ten.00%),Japanese Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South America(2.00%). There are whole about 51-100 folks in our office.
3.what can you purchase from us?
Constantly a pre-production sample just before mass manufacturing
Constantly last Inspection ahead of shipment
four. why should you acquire from us not from other suppliers?
Specialist one-to-1 motor tailored . The world’s large organization of selection for high top quality suppliers . ISO9001:2008 quality administration system certification, by means of the CE, ROHS certification.
5. what providers can we supply?
Recognized Shipping and delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDP,DDU,Specific Supply,DAF,DES
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY
Acknowledged Payment Variety: T/T,L/C,D/P D/A,MoneyGram,Credit rating Card,PayPal,Western Union,Funds,Escrow
Language Spoken:English,Chinese
Application: | Universal, Household Appliances, Car |
---|---|
Operating Speed: | Constant Speed |
Excitation Mode: | Excited |
Function: | Control |
Casing Protection: | Closed Type |
Number of Poles: | 8 |
###
Samples: |
US$ 60/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
/General Specification | |
(Item) | (Specification) |
Winding type | Star |
Hall effect angle | 120 120 degree electrical angle |
Shaft run out | 0.025mm |
Radial play | 0.02mm@450g |
End play | 0.08mm@450g |
Max.radial force | 75N @20mm form the flange |
Max.axial force | 15N |
Insulation class | Class B |
Dielectric strength | 500VDC for one minute |
Insulation resistance | 100MΩ Min.,500VDC |
###
/Electrical Specification: | ||||||
/Model | ||||||
Specification | Unit | JK57BLS005 | JK57BLS01 | JK57BLS02 | JK57BLS03 | JK57BLS04 |
Number Of Phase | Phase | 3 | ||||
Number Of Poles | Poles | 4 | ||||
Rated Voltage | VDC | 36 | ||||
Rated Speed | Rpm | 4000 | ||||
Rated Torque | N.m | 0.055 | 0.11 | 0.22 | 0.33 | 0.44 |
Rated Current | Amps | 1.2 | 2 | 3.6 | 5.3 | 6.8 |
Rated Power | W | 23 | 46 | 92 | 138 | 184 |
Peak Torque | N.m | 0.16 | 0.33 | 0.66 | 1 | 1.32 |
Peak Current | Amps | 3.5 | 6.8 | 11.5 | 15.5 | 20.5 |
Back E.M.F | V/Krpm | 7.8 | 7.7 | 7.4 | 7.3 | 7.1 |
Torque Constant | N.m/A | 0.074 | 0.073 | 0.07 | 0.07 | 0.068 |
Rotor Inertia | g.c | 30 | 75 | 119 | 173 | 230 |
Body Length | mm | 37 | 47 | 67 | 87 | 107 |
Weight | Kg | 0.33 | 0.44 | 0.75 | 1 | 1.25 |
Sensor | /Honeywell | |||||
Insulation Class | B | |||||
Degree of Protection | IP30 | |||||
Storage Temperature | -25~+70ºC | |||||
Operating Temperature | -15~+50ºC | |||||
Working Humidity | 85% RH() | |||||
Working Environment | (),,,, | |||||
Altitude | 1000 |
Application: | Universal, Household Appliances, Car |
---|---|
Operating Speed: | Constant Speed |
Excitation Mode: | Excited |
Function: | Control |
Casing Protection: | Closed Type |
Number of Poles: | 8 |
###
Samples: |
US$ 60/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
/General Specification | |
(Item) | (Specification) |
Winding type | Star |
Hall effect angle | 120 120 degree electrical angle |
Shaft run out | 0.025mm |
Radial play | 0.02mm@450g |
End play | 0.08mm@450g |
Max.radial force | 75N @20mm form the flange |
Max.axial force | 15N |
Insulation class | Class B |
Dielectric strength | 500VDC for one minute |
Insulation resistance | 100MΩ Min.,500VDC |
###
/Electrical Specification: | ||||||
/Model | ||||||
Specification | Unit | JK57BLS005 | JK57BLS01 | JK57BLS02 | JK57BLS03 | JK57BLS04 |
Number Of Phase | Phase | 3 | ||||
Number Of Poles | Poles | 4 | ||||
Rated Voltage | VDC | 36 | ||||
Rated Speed | Rpm | 4000 | ||||
Rated Torque | N.m | 0.055 | 0.11 | 0.22 | 0.33 | 0.44 |
Rated Current | Amps | 1.2 | 2 | 3.6 | 5.3 | 6.8 |
Rated Power | W | 23 | 46 | 92 | 138 | 184 |
Peak Torque | N.m | 0.16 | 0.33 | 0.66 | 1 | 1.32 |
Peak Current | Amps | 3.5 | 6.8 | 11.5 | 15.5 | 20.5 |
Back E.M.F | V/Krpm | 7.8 | 7.7 | 7.4 | 7.3 | 7.1 |
Torque Constant | N.m/A | 0.074 | 0.073 | 0.07 | 0.07 | 0.068 |
Rotor Inertia | g.c | 30 | 75 | 119 | 173 | 230 |
Body Length | mm | 37 | 47 | 67 | 87 | 107 |
Weight | Kg | 0.33 | 0.44 | 0.75 | 1 | 1.25 |
Sensor | /Honeywell | |||||
Insulation Class | B | |||||
Degree of Protection | IP30 | |||||
Storage Temperature | -25~+70ºC | |||||
Operating Temperature | -15~+50ºC | |||||
Working Humidity | 85% RH() | |||||
Working Environment | (),,,, | |||||
Altitude | 1000 |
Worm gear reducer
A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by czh 2022-11-25